MODELS: DFI-6518-02, DFI-6518-03, DFI-6518-04
VOLTAGE
120 VAC, 60 Hz
AMPS
12.5 Amps
WATTS
1500 Watts
PRODUCT SPECIFICATIONS
OPERATING INSTRUCTIONS
BULB REPLACEMENT
Note: When first running the heater there may
be an odor. This is normal as the heater has a
surface coating on the internal parts. For the
first several hours of operation, the coating
reacts with the internal parts to permanently
protect them. The odor is safe; if you are
sensitive to the odor, it is recommended to run
the heater in a well-ventilated area until the
odor dissipates.
Warning: This is an unvented, electric
appliance. DO NOT attempt to burn wood or
manufactured firelogs in or on this appliance
or grate.
tsicustomerservice.com for product warranty registration
Remote Control
Control Panel Location
A663
-- POWER
-- FLAME
-- HEATER
The Power button supplies power to all of the functions of the stove and will
activate the flame effect. This switch must be lit for any of the functions to work.
OPERATING INSTRUCTIONS
Use “+”or “--” to increase or decrease the flame brightness levels.
The stove consists of an infrared type heater. The HEATER button turns the heater to
1000W (low heat), 1500W (high heat) and off.
1) Remove the Phillips head screws.
2) Remove back panel to replace the light bulb.
Control Panel
For Customer Service:
tsicustomerservice.com
(+1) 888-674-7517
8:30 a.m.-5:30 p.m., EST, Monday-Friday
Made in China
© 2018, Twin-Star International,Inc.
Manufactured and distributed by Twin-Star
International, Inc., under license from Duraflame,
Inc. duraflame, the flame symbol and logo are
registered trademarks of Duraflame, Inc.
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China
Phillips Head Screwdriver Clear, 40-Watt, E12 socket base light bulb
(candelabra base, B bulb).
Tools Required for Assembly
bulb
Screws