MODELS: DFI-470-06, DFI-470-07, DFI-470-08, DFI-470-09
© 2018, Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China
VOLTAGE
120 VAC, 60 Hz
AMPS
12.5 Amps
WATTS
1500 Watts
PRODUCT SPECIFICATIONS
OPERATING INSTRUCTIONS
HANDLE INSTALLATION
For Customer Service:
tsicustomerservice.com
(+1) 888-674-7517
8:30 a.m.-5:30 p.m., EST, Monday-Friday
Manufactured and distributed by Twin-Star International, Inc., under license from
Duraflame, Inc. duraflame, the flame symbol and logo are registered trademarks of
Duraflame, Inc.
Note: When first running the heater there may
be an odor. This is normal as the heater has a
surface coating on the internal parts. For the
first several hours of operation, the coating
reacts with the internal parts to permanently
protect them. The odor is safe; if you are
sensitive to the odor, it is recommended
to run the heater in a well-ventilated area until
the odor dissipates.
Warning: This is an unvented, electric appliance.
DO NOT attempt to burn wood or manufactured
firelogs in or on this appliance or grate.
Go to tsicustomerservice.com for product warranty registration
Control Panel Location
Thermostat Dial
Heater Switch
Power Switch
Flame Brightness Dimmer
1. Set the thermostat knob by turning clockwise to allow the heater to warm up the room.
2. When the desired comfort level is reached, lower the thermostat knob counter
clockwise until the unit shuts off.
3. The heater will now automatically maintain the desired comfort level by cycling the
heater on and off.
Note: Day to day changes in room or outdoor temperatures can effect the thermostat.
Readjust the thermostat if needed.
OPERATING INSTRUCTIONS
1. The 1000W switch will turn on the heater to the low heat setting and will also
turn the heater off.
2. Turning on both the 1000W and 1500W switches will turn on the high heat
setting.
High Heat--1000W(ON)+1500W(ON) Low Heat--1000W(ON)+1500W(OFF)
Control Panel
1. This switch turns on and off the main power.
2. The switch will be illuminated when the heater is on.
3. This switch needs to be on in order to use the heater.
1. Turning the dial clockwise will increase the brightness of the flame effect.
2. Turning the dial counter clockwise will decrease the brightness of the flame effect.
The manufacturer warrants that your new Electric Stove is free from manufacturing and material defects for a period of one year from date of puchase, subject to
the following conditions and limitations.
1. Install and operate this Electric Stove in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized
repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the product.
3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected
to normal conditions of use and service, after said defect is confirmed by the manufacturer’s inspection.
4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).
5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair, replacement, or otherwise of same, will
not be covered by this warranty, nor shall the manufacturer assume responsibility for same.
6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out of the use, or inability to use
the product, except as provided by law.
7. All other warranties – expressed or implied –with respect to the product, its components and accessories, or any obligations/liabilities on the part of the manu-
facturer are hereby expressly excluded.
8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to the sale of the product.
9. The warranties as outlined within this document do not apply to non accessories used in conjunction with the installation of this product.
10.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This warranty is void if:
a. The fireplace is subjected to prolonged periods of dampness or condensation.
b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.
c. You do not have the original receipt of purchase.
IF WARRANTY SERVICE IS NEEDED
Contact the manufacturer by calling customer service department at 1-888-674-7517, 7 days a week 24 hours a day
at our toll-free help line. Our Consumer Service department is available Monday – Friday 8:30 am – 5:30 pm EST.
Make sure you have your warranty, your sales receipt, location of purchase and the model/serial number of
your product.
IMPORTANT INSTRUCTIONS
SAVE THESE
INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following:
1. Read all instructions before using this appliance.
2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. If provided, use handles when moving this appliance. Keep
combustible materials, such as furniture, pillows, bedding, papers, clothes and
curtains at least 3 feet (0.9 m) from the front of this appliance and keep away
from the sides and the rear.
WARNING: In order to avoid overheating, do not cover the heater.
3. CAUTION: Never leave the heater operating unattended. Extreme caution is
necessary if unsupervised children or invalids are nearby.
4. The appliance is not to be used by children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
5. Always unplug this appliance when not in use.
6. Do not operate any heater with a damaged cord or plug or after the appliance
malfunctions, or if it has been dropped or damaged in any manner.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
8. Do not use outdoors.
9. This heater is not intended for use in bathrooms, laundry areas and similar
indoor locations. Never locate this appliance where it may fall into a bathtub or
other water container.
10. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be tripped over.
11. To disconnect this appliance, turn controls to the off position, then remove
plug from outlet.
12. Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the
appliance.
13. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where opening may
become blocked.
14. This appliance has hot and arcing or sparking parts inside. Do not use it
in areas where gasoline, paint or flammable liquids are used or stored.
This stove should not be used as a drying rack for clothing. Christmas
stockings or decorations should not be hung in the area of it.
15. Use this appliance only as described in the manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or
injury to persons.
16. This product is equipped with a polarized plug (one blade is wider than
the other blade). To reduce the risk of electrical shock, this plug will fit into
a polarized outlet only one way. This is a safety feature. If you are unable
to insert the plug into the electrical outlet, try reversing the plug. If the plug
still does not fit, contact a qualified electrician.
1-YEAR LIMITED WARRANTY
A661
1
2
1. Attach the handle to the mounting hole on the
outside of the door.
2. Insert the screw (0.16 in. x 0.4 in.) from inside of door
and tighten the screw until the handle can not be turned.
Thermostat Dial
Heater Switch Power Switch
Flame Brightness
Dimmer
Phillips Head Screwdriver
Clear, 40-watt, E12 socket base light bulb
(candelabra base, B bulb).
BULB REPLACEMENT
Tools Required for Assembly
1. Unplug the stove. Remove the screws holding
the stove back panel in place. Remove the back
panel to access the light bulb.
2. Unscrew 3 screws holding the baffle and remove
it carefully.
3. Remove light bulb and replace. Reverse steps
2 and 1, reinstalling baffle and stove back panel
into position. Be careful not to overtighten the
screws.
Screws
Bulb
Baffle
1
2
3
