2-4-2
U27NDA
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as identification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T=Top B=Bottom R=Right L=Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
.
[33]
[32]
Loading Arm (TU)
Assembly
B
DM2,DM14
(+)Refer to Alignment
Sec.Pg.2-4-9
[34]
[2],[25]
M Brake (TU) Assembly
T
DM1,DM15 *(P-7), Brake Belt
[35]
[2],[25]
M Brake (SP) Assembly
T
DM1,DM15 *(P-8)
[36]
[35]
Tension Lever Assembly
T
DM1,DM15
[37]
[36]
T Lever Holder
T
DM15
*(L-12)
[38]
[34]
Reel (TU)(D2)
T
DM1,DM15
[39]
[38]
M Gear
T
DM1,DM15
[40]
[36]
Reel (SP)(D2)
T
DM1,DM15
[41]
[32],[36]
Moving Guide S
Preparation
T
DM1,DM16
[42]
[33]
Moving Guide T
Preparation
T
DM1,DM16
[43]
[19]
TG Post Assembly
T
DM1,DM16 *(L-13)
[44]
[28]
Rack Assembly
R
DM17
(+)Refer to Alignment
Sec.Pg.2-4-10
[45]
[44]
F Door Opener
R
DM17
[46]
[46]
Cleaner Assembly
T
DM1,DM6
[47]
[46]
CL Post
T
DM6
*(L-14)
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
↓
(6)
↓
(7)
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL
INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
