Getting Started
EN-24
Removing the Optical Disc Drive (ODD)
To remove the ODD, follow the steps below:
1.
Slide the I/O device cover latch to the unlock position to release the I/O device
cover. Then open the I/O device cover.
2.
Press and hold the media bay latch release button. Then pull the ODD out to
disengage it from its compartment.
3.
Pull the ODD out of the media bay compartment.
4.
Close the I/O device cover. Then slide the I/O device cover latch to the lock
position to secure the I/O device cover in place.
