2-3
Chapter 2 BASIC OPERATION
1-2. Standard Folding
There are six types of standard folding modes: single fold, double fold, irregular accordion fold, letter
fold, accordion fold and gate fold. Paper is folded as shown below when the paper is placed on the
paper feed table with its print side facing upward.
Single fold
Double fold
Irregular
accordion fold
Letter fold
Accordion fold
Gate fold
Paper feed direction
Paper ejection direction
1-3. Operation Procedures
Power switch
1
Insert the power cord in the wall
socket and turn on the power.
Press “ I ” to turn on the power.
Press “O" to turn off the power.
Side guide
Fixing screw
Side guide
Fixing screw
2
Loosen the fixing screws of the side
guides, and move the side guides to
fit the paper width.
Paper
Paper set lever
Guide plate
3
Raise the paper set lever and place
some paper on the paper feed table.
Push in the paper until its lead edge touch-
es the guide plate.
The message "NO PAPER" displayed on
the LCD disappears and "COUNT 0" is dis-
played instead.
Fan the paper well and stack them neat-
ly at the center of the paper feed table.
Summary of Contents for DF-755
