59
9 - START UP PROCEDURE
9.18 Return To The Factory Settings:
• Press the two Menu buttons
simultaneously and
then (+) button until
symbol flashes on the menu
bar.
• Select the INSTALLER menu using
. "COdE"
appears on the display.
• Use (-) or (+) button to input the installer code
"
0012
".
•
Confirm using
button. P:1 is displayed with 1
flashing.
• Press the [+] button several times p:df is displayed
with df
flashing.
• Press
button df:x
is displayed with x flashing.
This is the current value of X for dF. Check this against
the value of X on the type plate.
• Enter the value of X shown on the type plate using the
[-] or [+] button.
•
Confirm the value with the
button, df:y is
displayed with y flashing. This is the current value of
Y
for dU. Verify the value of y on the rating plate is the
same.
• Enter the value of y shown on the rating plate using the
[-] or [+] button.
•
Confirm value with the
button. The factory
settings are reset.
• Display returns to current operating mode.
...x
-
-
3x
dF =1 dU =1
-
PN 240011664, Rev. L [11/01/2020]
