Duncan SILVER LAKE, User Manual

Page: 3 / 12

PRE-DELAY KNOB – Controls the pre-delay (the amount of
time between the initial note being played and when the reverb
starts). 0mS - 500mS depending on the reverb type.
FUNCTION KNOB
– Selects one of four parameters to be
controlled with the TWEAK knob. Mod Depth – the Tweak knob
will increase the depth of the Modulation. Mod Rate – the Tweak
knob will increase the speed of the Modulation. Hi Pass – the
Tweak knob will roll off low frequencies. Lo Pass – the Tweak
knob will roll off high frequencies.
THRESHOLD KNOB
– Knob to control the sensitivity of the
Dynamic Expression feature. The LED will illuminate brighter
when there is more of the selected parameter blended in, and
dim when there is less.
HARD/SOFT/OFF TOGGLE
– Toggles the Dynamic
Expression between its two modes or turns it off. HARD MODE
– Blends in more of the selected parameter (Mix, Damp, or
Modulation) when you play harder.
SOFT MODE – Blends in
more of the selected parameter as you play softer.
EXPRESSION ASSIGN BUTTON
– Selects the parameter
that the Dynamic Expression feature controls.
GRIT KNOB – Adds soft clipping and ‘grit’ to the wet signal.
DAMP KNOB
– Control to darken the sound of the wet signal.
Adding damping lowers high-frequency response in the reverberation.
6
6
7
7
8
8
9
9
10
10
11
11
12
12
1
2
3
4
5
13
14
15
16
17