331 Auto Creaser 15
The illustration for V mode is as following
Define the first position and crease gap and the qty in one
batch, The first page will be one line as reference, and
following sheets will be 2 creases that goes further
successively to the reference line .
In this way the book can be folded with a square back after
sandel stitched
Effect of above 4 parameters is as above drawing
While progress crease function is activated and all setting is
done, screen will jump to the main operation mode. But the screen is different,
and it has only 1 page. As follow:
Press
, goes to MODE 5.Press
again, goes to MODE 6
5.3.6 Save a Job
MODE 5 Save Job
Frequently used crease data can be saved and recalled, so that user
don’t
have to input data each time. The system at most saves 30 jobs.
How to save a job?
a. See MODE 2, Let
’s input a job, say, 10, 20, 30, 0 , 0 ,0.
b. Press
2 times, we go to
Save job
Mode.
M
M
M
Total sheet
Progressive depth
+ for Inc, - for Dec,
±
for I & D, V for V
Initial position
