Duke 2505249 Page 1 Instruction Sheet Download

Page: 1 / 4

Reproduction without written permission is prohibited. Duke is a registered

trademark of the Duke Manufacturing Co.

CAUTION:

Please read these instructions completely before attempting

to install, operate or service this equipment.

WARNING for CA residents: go to www.dukemfg.com/prop65 for prop 65 warning

Instruction Sheet

POS Support Bracket Kit

2505249

P/N 229403

REV A 04/28/2021

PARTS IN KIT

TOOLS NEEDED

Stubby Phillips Screw Driver

POS Support Bracket

2505248

Summary of Contents for 2505249

Page 1: ...e Manufacturing Co CAUTION Please read these instructions completely before attempting to install operate or service this equipment WARNING for CA residents go to www dukemfg com prop65 for prop 65 wa...

Page 2: ...wer to equipment could cause equipment damage and or bodily injury 2 Remove the screws that are holding the POS arm in place which are located underneath the countertop Do NOT discard these screws as...

Page 3: ...with these two holes on the POS arms Once the holes are aligned re install the screws Do NOT fully tighten the screws as they will be tightened on a later step 4 Slide the POS arm down into the hole...

Page 4: ...KET INSTALLATION 7 8 9 10 Align the holes of the POS arm and the mounting bracket located underneath the countertop Once aligned re install and tighten the screws that were removed from step two makin...