Dukane ImagePro 8070, User Manual

Page: 33 / 82

25
3. Projecting an Image (Basic Operation)
���
Selecting a Source
Selecting the computer or video source
VIDEO S-VIDEO COMPUTER-1 COMPUTER-2
LAMP
STATUS
POWER
AUTO
ADJ.
ON/STAND BY
SELECT
VOLUME
L-CLICK
MOUSE
R-CLICK
AUTO ADJ.
ASPECT HELP
FREEZE PICTURE
S-VIDEO
VIDEO COMPUTER
1
2
NOTE: Turn on the computer or VCR connected to the projector.
Using the cabinet buttons
Press any one of the COMPUTER 1/2
VIDEO and S-VIDEO buttons.
The corresponding indicator will light green.
Using the Remote Control ( 8767A/ 8769/ 8070 )
Press any one of the COMPUTER 1/2, COMPONENT, VIDEO or S-
VIDEO buttons.
Selecting from the Source List ( 8771 )
1. Press and quickly release the SOURCE button on the remote
control.
The Source list will be displayed.
SOURCE PIC-MUTE
POWER ASPECT
2. Press and quickly release the SOURCE button to select the
source in the Source list.
Each time the SOURCE button is pressed, the selection in the
Source list will change as follows:
8771
Computer 1
→
Computer 2
→
Video
→
S-Video
→
Computer 1
→
...
3. Press the ENTER button to display the selected source.
NOTE: Highlighting the source for 2 seconds without pressing the ENTER
button will also display the selected source.
SOURCE PIC-MUTE
POWER ASPECT
8767A/8769/8070
8771
8771
8771