manualshive.com logo in svg

Dukane 9080WUSS, User Manual, Page: 24 / 90

Share
Download
Dukane 9080WUSS User Manual Download Page 24

24

Installation of the Projector

8. Correcting keystoning caused by projection angle

      a. 

 To adjust keystoning, press the 

MENU

 button on the remote control and choose Advanced 

 

Warping 

Keystone adjust and use 

▼▲

 buttons to adjust Vertical Keystone. Refer to fig3 on 

next page.

      b.  To adjust keystoning, press the MENU button on the remote control and choose  

 Advanced 

 Warping 

 Keystone adjust and use

▲ ▼

buttons to adjust Horizontal Keystone.  

 

Refer to Fig 4 on next page.

 

The picture after adjust

Adjust

Adjust

Zoom Out

Zoom In

Fig  1   

Focus

Fig 3

Vertical Keystone

Fig 4

Horizontal Keystone

9. Turning off the projector

Press the 

 button on the projector or the 

STANDBY

 button on the remote control. The message will 

appear on the screen. Press the button again while the message appears. When the projector has been 

turned off, the cooling fan will remain in operation for approximately 10 seconds.

Summary of Contents for 9080WUSS



























































































Reviews:

No comments