147
6. Installation and Connections
Connecting HDMI Input
You can connect the HDMI output of your Blu-ray player, hard disk player, or notebook type PC to the HDMI 1 IN or
HDMI 2 IN connector of your projector.
Input connector
INPUT button on the projector
cabinet
Button on the remote control
HDMI 1 IN
1:HDMI 1
1/HDMI 1
HDMI 2 IN
2:HDMI 2
2/HDMI 2
TIP: For users of audio video equipment with an HDMI connector:
Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”.
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
•
When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector’s video
level can be made settings in accordance with the Blu-ray player’s video level. In the menu select [ADJUST]
→
[VIDEO]
→
[VIDEO LEVEL] and make necessary settings.
•
If the HDMI input’s sound is not output,
check if [HDMI1] and [HDMI2] are set [HDMI1] and [HDMI2] correctly the
on-screen menu [SETUP]
→
[SOURCE OPTIONS]
→
[AUDIO SELECT].
(
→
page
)
HDMI 1 IN
HDMI 2 IN
AUDIO OUT
Audio cable (not supplied)
HDMI cable (not supplied)
Use High Speed HDMI
®
Cable.
