Dukane 6710UL, User Manual

Page: 189 / 239

6. Connecting to Other Equipment
165
Connecting HDMI Input
You can connect the HDMI output of your Blu-ray player, hard disk player, or notebook type PC to
the HDMI 1 IN or HDMI 2 IN connector of your projector.
HDMI 1 IN HDMI 2 IN
AUDIO OUT
VIDEO OUT
VIDEO L R
L R
S-VIDEO
HDMI OUT AUDIO OUT
AUDIO IN
Audio cable (not supplied) HDMI cable (not supplied)
Use High Speed HDMI® Cable.
Input connector INPUT button on the projector cabinet Button on the remote control
HDMI 1 IN HDMI1 HDMI1
HDMI 2 IN HDMI2 HDMI2
TIP:
• For users of audio video equipment with an HDMI connector:
Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”.
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
• When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector’s video level can be
made settings in accordance with the Blu-ray player’s video level. In the menu select [ADJUST]
→
[VIDEO]
→
[VIDEO LEVEL] and
make necessary settings.
• If the HDMI 1 IN or HDMI 2 IN input’s sound is not output, check if [HDMI1] and [HDMI2] are set [HDMI1] and [HDMI2] correctly the
on-screen menu [SETUP]
→
[SOURCE OPTIONS]
→
[AUDIO SELECT]. (
→
page 150 )