Dukane 6652WSSB User Manual Download

Page: 38 / 174

2. Projecting an Image (Basic Operation)

2-3. Turning on the Projector

WARNING

The projector produces a strong light. When turning on the power, make sure no one within
projection range is looking at the lens.

1. Remove the lens cap.

With the lens cap’s stopper pressed up, pull
forward and off.

Stopper

2. Press the (POWER) button on the projec-

tor cabinet or the POWER ON button on the
remote control.
The POWER indicator lights blue and the image
is projected on the screen.

TIP:
• When the message “PROJECTOR IS LOCKED ! ENTER YOUR

KEYWORD.” is displayed, it means that the [SECURITY] feature
is turned on. (

→

page

)

After you turn on your projector, ensure that the
computer or video source is turned on.

NOTE:
• When no input signal is present, the no-signal guidance is dis-

played (factory menu setting).

Standby

Blinking

Power On

Blinking orange light

Blinking blue

light

Steady blue light

Summary of Contents for 6652WSSB















































































































































































Search results

Summary of Contents for 6652WSSB

Reviews:

Related manuals for 6652WSSB

Brands by name

Popular brands

Dukane 6652WSSB, User Manual

Search results

Summary of Contents for 6652WSSB

Reviews:

Related manuals for 6652WSSB

Brands by name

Popular brands