Dukane 6647W User Manual Download

Page: 41 / 144

3. Convenient Features

Pincushion

By this feature, it enables to adjust left and right side or top and bottom side independently for reforming pincushion

distortion.

[

6655W

6647W

]

1. Press the KEYSTONE button with no menu displayed.

The KEYSTONE screen will be displayed.

• Press the KEYSTONE button when using the remote control.

2. Press the

▼

▲

button to select [PINCUSHION LEFT/RIGHT]

or [PINCUSHION TOP/BOTTOM].

3. Press the

◀

▶

button to correct distortion.

NOTE:

• The [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOTTOM] item is not

available when [KEYSTONE HORIZONTAL], [KEYSTONE VERTICAL] or [COR-
NERSTONE] is activated.

• Before performing correction, set the lens shift to the center position.

4. Press the EXIT when PINCUSHION adjustment is

completed.

[

6655WU/6647WU

]

1. Press the KEYSTONE button with no menu displayed.

The KEYSTONE screen will be displayed.

• Press the KEYSTONE button when using the remote control.

Summary of Contents for 6647W

















































































































































Search results

Summary of Contents for 6647W

Reviews:

Related manuals for 6647W

Brands by name

Popular brands

Dukane 6647W, User Manual

Search results

Summary of Contents for 6647W

Reviews:

Related manuals for 6647W

Brands by name

Popular brands