Σελίδα
13
από
20
A bilge pump is a water pump used to remove bilge water
On this yacht the bilge pump is automatic. So keep the bottom from
control panel permanently open.
Operation of toilet pumps
The toilet is one of the most used pieces of equipment on your boat. Correct operation
of the toilet is essential for the safety and comfort of your crew and craft.
Open inlet and outlet seacock’s (and secondary
valves if fitted).
Half fill the bowl with warm fresh water.
Keeping the Flush Control Lever in the Shut
(
) position, pump out the warm water.
Normal use
Open inlet and outlet seacocks (and secondary valves if fitted).
Before use, ensure that there is enough water in the bowl to prevent the toilet paper
becoming compacted at the bottom of the bowl. If the bowl is empty, move the Flush
Control Lever to the Open (
) position and pump the handle up and down until
the flushing pump is primed and water enters the bowl.
Then Shut (
) the Flush Control.
Operate the pump with long, smooth strokes for
efficient and easy operation.
During use, pump as necessary to keep the
contents of the bowl low enough for comfort.
Use good quality hard or soft household toilet
paper, but do not use more than necessary.
After use, keep the Flush Control Shut (
) and
pump until the bowl is empty.
