Duerkopp Adler 669 Premium Operating Instruction Download Page 83

Page: 83 / 154

Programming

Operating Instructions 669 PREMIUM - 00.0 - 11/2016

5.5.2

Canceling a program in automatic mode

To cancel a program in automatic mode:

Push the pedal fully back.



The program is canceled and the thread cut. The machine
takes note of where the program was canceled, and then
continues from the same point when sewing resumes.

To cancel the program completely, press the pedal all the way
backwards again.



The program is canceled, and the machine starts from the
first seam section in the program when sewing resumes.

5.6

Using Programming/Edit mode

5.6.1

Creating a new program

To create a new program:

Press the

button.



The softkey menu appears.

Press the

button.



The control displays the next free program number.

Fig. 36: Creating a new program

Press the

button to load the program number.

Or:

Choose a different program number using

▲

▼

or enter one

with the numeric buttons

0 – 9

and then press the

button

Summary of Contents for 669 Premium



























































































































































Search results

Summary of Contents for 669 Premium

Reviews:

Related manuals for 669 Premium

Brands by name

Popular brands

Duerkopp Adler 669 Premium, Operating Instruction

Search results

Summary of Contents for 669 Premium

Reviews:

Related manuals for 669 Premium

Brands by name

Popular brands