Duerkopp Adler 669 Premium, Operating Instruction

Page: 79 / 154

Programming
Operating Instructions 669 PREMIUM - 00.0 - 11/2016 77
5.5 Using Automatic mode
Automatic mode includes all program numbers from 001 to 999.
To access Automatic mode:
1. Use
◄
/
►
to select the Program parameter.
2. Use
▲
/
▼
to select the program number 001 or another one
(if available).

The software switches to Automatic mode, the program name
is shown briefly, and then the following display appears:
Fig. 32: Display in Automatic mode
The following table explains the individual symbols on the display
and the functions of the buttons on the control panel.
Symbol Description
Depending on the assignment of buttons, there may be
different functions here,

p. 52 .
• Press softkey button
Quick access function (softkey menu)
Press the
softkey menu button,

p. 52 .
Program number
Value range: 000 - 999
• Use
◄
/
►
to select the Program parameter
• Use
▲
/
▼
to change the program number or enter the
program number using the numeric buttons 0 – 9 and
confirm with the OK button
If you select program 000, the control selects Manual
mode,

p. 50 .
Seam sections
Number of seam sections contained in the current program.
1.9
4 +000 +00 -013
10 10
10 10