15
ENGLISH
L2003212 Installation guide for DucoBox Energy Comfort (Plus) (Revision A | 18.10.2022)
Floor mounting
Iteration
Rev. Date
Name
Description
23-Aug-17
Status Date
Status
MONTAGE_MUUR_COMFORT
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_COMFORT
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.300
-
Date: 23-Aug-17
Iteration
Rev. Date
Name
Description
22-Nov-17
Status Date
Status
MONTAGE_MUUR_COMFORT
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_COMFORT
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.300
-
Date: 22-Nov-17
Iteration
Rev. Date
Name
Description
22-Nov-17
Status Date
Status
MONTAGE_MUUR_COMFORT
mm³
dm²/m
kg/m
mm
Handelsstraat 19 - 8630 VEURNE
tel. 0032-58/330033 - fax.0032-58/330044
email: info @ duco.eu www.duco.eu
This drawing is property of Vero Duco NV and can not be copied, neither shown to
third party/externally without written permission.
0.000
0.000
Drawing Number
Volume
Coat. Surf.
Weight
Outline
MONTAGE_MUUR_COMFORT
Format: A0
Production Number:
Mat.:
Draftsman: -
Tol.: -
Scale: 0.300
-
Date: 22-Nov-17
Slide the cardboard packaging off the
unit�
Fit the optional mounting chair in
accordance with the manual supplied
with it and ensure that it is positioned on
a solid, flat surface�
Place the DucoBox Energy Comfort (Plus)
on the mounting chair and check again
that it is level� This will ensure that
condensate drains off properly�
05.C
Humidity Sensor (optional)
The optional, separately available Humidity Sensor (0000-4723) is placed in the extract air duct of the DucoBox Energy Comfort
(Plus) and centrally measures the humidity of the air extracted from the house� The sensor has a 2m connection cable and is pow-
ered from the DucoBox� A DucoBox Energy Comfort (Plus) contains a maximum of one Humidity sensor with central measurement
in the ducts� Local moisture measurement can be done with optional Humidity (Room) Sensors�
ETA!
L
ETA!
R
Connecting the Humidity Sensor to the DucoBox
Energy Comfort (Plus)
1
Make sure the DucoBox Energy Comfort (Plus) is not
under current�
2
Provide a 10�5-12 mm bore in the extract air duct (ETA)
at a location no further than what can be bridged with a
2-metre connection cable� Attention: the position of the
ETA duct depends on the chosen settings for starting the
3
Slide the moisture sensor into the borehole� Make sure
that the arrow marks on the sensor point in the direction
of the airflow (= pointing to the DucoBox)�
4
Attach the sensor with the self-tapping screws provided�
Make sure the connection flange is pressed against the
duct so that the assembly is airtight�
5
Connect the cable of the Humidity Sensor to the printed
circuit board (see 'Connections' on page 9)� The
DucoBox Energy Comfort (Plus) will automatically
recognise the Humidity Sensor when the device starts�
1
2
3
