background image

TODDLER RAIL

installation instructions 
for use with the following cribs:

OSLO CRIB 

TODDLER RAIL

Thank you for selecting a ducduc for nod product.

Keep instructions for future use.

This TODDLER RAIL is to be used to convert your 
CRIB to a toddler bed. When converting your crib to a 
toddler bed, you must use only the TODDLER RAIL 
provided.

Please check contents against the components list in 
these instructions. Also, please ensure there was no 
damage that may have occurred in shipping. If any 
components are missing or you find any damage, 
please contact The Land of Nod at 800-933-9904 
before continuing.

Read all the instructions before use of the TODDLER 
RAIL.

Please remember to securely tighten all bolts and 
fasteners and periodically check to make sure every 
component is properly and securely in place.

Pay close attention to the safety warnings in these 
instructions and on CRIB labels.

A minimum of two people is required to safely 
assemble and move the CRIB. Do not attempt to move 
this CRIB alone - dragging or sliding it across a floor 
may cause structural damage.

CAUTION: 

The mattress 

intended for use on this bed 

shall be a full-size crib mattress 

having minimum dimensions of 

51

5/8  

in. (1310 mm) in length and 

27¼ in. (690 mm) in width and 

4 in. (100 mm) in thickness.

This bed is designed to be used by a child 
with a minimum age of 15 months and a 
maximum weight of 50 lbs.

Summary of Contents for OSLO CRIB TODDLER RAIL









Reviews: