DUCATI HOME AUTOMATION
Automazione Cancelli Via Cassani snc 43036 Fidenza (PR) Italy
Tel +39-0524-527967 lu-ve 8.30-18.00 [email protected] www.ducatihome.it
Sonoff is a family of WiFi and Zigbee switches that can be controlled remotely via smartphone with the eWelink App, avai-
lable for both Android and iOS, which allows you to control your home’s electrical devices by integrating and replacing the
home’s electrical system:
The Sonoff 4CH Pro R3 is a 4-output WiFi switch that can be configured as a diverter or timed button, both independently
and inter-locked between them.
The Wi-Fi 6090 4CH device consists of a SONOFF control module model 4CH PRO R3 with an integrated 4-channel radio
transmitter with Ducati rolling code protocol.
Wi-Fi 6090 4CH allows you to control the engines of the Ducati home range by means of a radio signal which, starting from
the device, reaches the radio receivers on board the Ducati home automations. Therefore without the need for any electrical
connection via cable between the SONOFF module and the motorization to be controlled.
The SONOFF module terminals must no longer be used.
The SONOFF module must be powered by acompatible adaptor.
The built-in remote control of the device makes the Wi-Fi 6090 4CH device ready for use.
Each key on the SONOFF module (R1; R2; R3 or R4) corresponds to a radio transmission channel of the integrated remote
control and is ready to be combined with the DUCATIHOME motorization you want to control.
Warning: the maximum distance in line of sight between the Wi-Fi 6090 4CH module and the motorization to be controlled
must not exceed 30m.
Attention: walls or other physical barriers to free radio transmission as well as radio interference can limit the range of radio
transmission
Warning: for the correct functioning of the SONOFF module it is necessary that the signal of the Wi-Fi line to which the
module must connect is optimal.
Warning: it is necessary that the signal to the internet line is active and has an excellent signal.
The SONOFF module allows you to send commands via smartphone, Alexa, and Google Home
How to Synchronize 1 radio control channel of the Wi-Fi 6090 4CH device with the
DUCATI HOME opener
1- power the Wi-Fi 6090 4CH device from a power outlet by a compatible adaptor
2- on the DUCATI opener’s electronic board, press and release the radio control storage button (on the Persy shutter ope-
ners, PR70 board, use the P1 button for step-by-step command and P2 for the closing command only). The red LED will light
up to confirm that the board has entered the learning mode.
3- on the Wi-Fi 6090 4CH device, press and hold pressed a few seconds the button corresponding to the channel you want
to use to control the opener (R1, R2, R3 or R4). then release the button.
4- on the DUCATI opener’s electronic board, the red LED will flash briefly to confirm synchronization. Wait for the red LED to
switch off
The command channel has been synchronized
How to install the App on your smartphone or Tablet
Download the
eWeLink
App on your mobile device
Follow the instructions of the APP and register by entering your email
and creating a password.
Continue by pairing the Sonoff / Wi-Fi 6090 4CH device
Attention: to pair the Sonoff device, the smartphone/tablet and the Sonoff / Wi-Fi 6090 4CH device must both be connected
on the same Wi-Fi line.
From this moment you can proceed with giving a name to the Sonoff / Wi-Fi 6090 4CH device (useful if you use multiple
devices) and with the identification of each of the 4 control channels available on each device. . Please refer to the specific
instructions of the App that you will find inside the device for advanced functions such as synchronization with ALEXA or Go-
ogle Home. We also recommend consulting the many tutorials on Youtube that illustrate how to use the eWeLink App
DUCATI HOME AUTOMATION
Automazione Cancelli Via Cassani snc 43036 Fidenza (PR) Italy
Tel +39-0524-527967 lu-ve 8.30-18.00 [email protected] www.ducatihome.it
Wi-Fi 6940 4CH PRO
4
