Ducati PANIGALE V4 Owner'S Manual Download Page 272

Page: 272 / 331

Refuelling

Never overfill the tank when refuelling. Fuel should

never be touching the rim of filler recess.

Warning

Use fuel with low lead content and an original

octane number of at least 95.

Warning

The motorcycle is only compatible with fuel

having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is

forbidden. Using it could result in severe damage of

the engine and motorcycle components. Using fuel

with ethanol content over 10% will make the

warranty null and void.

Max level

Fig. 220

271

Summary of Contents for PANIGALE V4












































































































































































































































































































































Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands

Ducati PANIGALE V4, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4

Reviews:

Related manuals for PANIGALE V4

Brands by name

Popular brands