manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 93

Adjusting the rear shock absorber

The rear shock absorber has adjusters that enable

you to suit the setting to the load on the motorcycle.
For rear shock absorber adjustment, follow the

description on "Customising Riding Mode: DSS

suspension setting".

For further details on the operating principle of the

rear shock absorber and the DSS (Ducati SkyHook

System) please refer to the "DSS" chapter.

Attention

The shock absorber is filled with gas under

pressure and may cause severe damage if taken

apart by unskilled persons.
When carrying a passenger and luggage, set the rear

shock absorber spring to proper preload to improve

motorcycle handling and keep safe clearance from

the ground. You may find that rebound damping

needs adjusting as well. The shock absorber is

adjusted by electric impulses sent by the instrument

panel to the adjusters inside the shock absorber

body.

Fig 77

92

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands