manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 92

Adjusting the front fork

The front fork used on this motorcycle has rebound

(return), compression and spring preload

adjustment.

Fork rebound and compression damping is adjusted

by electric impulses sent by the instrument panel to

the adjusters inside the fork legs; spring preload is

adjusted manually through adjuster (1) on RH fork

leg.

Attention

Have the spring preload adjusted at a Ducati

Dealer or authorised Service Centre.
For fork adjustment, follow the description on

"Customising Riding Mode: DSS suspension

setting".

For further details on the operating principle of the

fork and the DSS (Ducati SkyHook System) please

refer to the "DSS" chapter.

Spring preload initial setting:

●

8 turns from fully unloaded.

Fig 75

1

Fig 76

91

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands