manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 37

Rider's obligations

All riders must hold a valid licence.

Attention

Riding without a licence is illegal and is

prosecuted by law. Always make sure you have your

licence with you when riding. Do not let

inexperienced riders or persons without a valid

licence use your motorcycle.
Do not ride under the influence of alcohol and/or

drugs.

Attention

Riding under the influence of alcohol and/or

drugs is illegal and is prosecuted by law.
Do not take prescription or other drugs before riding

unless you have consulted your doctor about their

side effects.

Attention

Some medications and drugs may cause

drowsiness or other effects that slow down reaction

time and the rider's ability to control the motorcycle,

possibly leading to an accident.
Some states require vehicle insurance.

Attention

Check your state laws. Obtain insurance

coverage and keep your insurance document secure

with the other motorcycle documents.
To protect rider and passenger safety, some states

mandate the use of a certified helmet.

Attention

Check your state laws. Riding without a helmet

may be punishable by law.

Attention

Riders without helmets are more likely to suffer

severe bodily injury or die if they are in an accident.

Attention

Check that your helmet complies with safety

specifications, permits good vision, is the right size

for your head, and carries a certification label

indicating that it conforms to the standards in force

in your state. Road traffic laws differ from state to

state. Learn about traffic laws in your state before

riding and always obey them.

36

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands