Ducati MULTISTRADA V25 Owner'S Manual Download Page 159

Page: 159 / 400

Parameter setting/displaying

Upon key-on, the instrument panel displays the

DUCATI logo and switches on the LED warning lights

in two steps ("initial check routine").

After this routine, the instrument panel displays the

main page in one of the available layouts (TRACK,

FULL, CITY and OFF ROAD), depending on the one

in use before last KEY-OFF.
During this first check stage, if the motorcycle speed

exceeds 5 km/h (3 mph) (actual speed), the

instrument panel will stop:

●

the display check routine and display the

standard screen containing updated

information;

●

the warning light check routine and leave ON

only the warning lights that are actually active at

the moment.

299

2538

260

MENU

DQS
DTC

UP/DW

ABS

SPORT

10:22

P.M.

RPM x 1000

GEAR

Km / h

13.5

Km/l

SETTING

RANGE

°C

TOT

CONS

AVG1

Fig 140

158

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands