Ducati MULTISTRADA Series Owner'S Manual Download Page 184

Page: 184 / 274

Setting menu - Bluetooth

This function allows the user to manage any paired

Bluetooth devices and add more.

●

Use buttons (1) and (2) from the Interactive

Menu to select the Setting menu item and press

ENTER (3).

●

Select the Bluetooth item and press ENTER (3).

Pairing are Paired devices are displayed:

Pairing allows pairing a new Bluetooth device.

Paired devices allows viewing and erasing paired

devices.

Use buttons (1) and (2) to scroll and select the desired

item. Press ENTER (3) to confirm.

Fig 179

Fig 180

183

Summary of Contents for MULTISTRADA Series



















































































































































































































































































Search results

Summary of Contents for MULTISTRADA Series

Reviews:

Related manuals for MULTISTRADA Series

Brands by name

Popular brands

Ducati MULTISTRADA Series, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA Series

Reviews:

Related manuals for MULTISTRADA Series

Brands by name

Popular brands