Ducati Multistrada MTS 1200S D-Air Page 344 Owner'S Manual Download

Page: 344 / 443

Tank filler plug

Opening

Lift flap (1) and insert the active or passive key in the

lock. Turn the key clockwise by 1/4 of a turn to release

the lock.

Lift the plug (2).

Closing

Close the plug (2) with the key inserted and push it

down into its seat. Remove the key and close flap (1)

protecting the lock.

Note

Plug can only be closed when key is inserted.

Warning

After refuelling, always make sure that the plug

is perfectly in place and closed.

Fig. 221

Fig. 222

343

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Related manuals for Multistrada MTS 1200S D-Air

Brands by name

Popular brands

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual

Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Related manuals for Multistrada MTS 1200S D-Air

Brands by name

Popular brands