Ducati Monster 696 2009, Manual

Page: 164 / 696

A
B
C
D
E
F
G
H
L
M
N
P
section
F 2
16 Monster 696/696+ - M.Y. 2009 - edition 00
Controls - Devices
Removal of the clutch slave cylinder
Warning
The manufacturer of the clutch slave cylinder (14) advises against servicing of its internal parts due to the safety-critical nature of
this component.
Incorrect overhaul of these critical safety components can endanger rider and passenger safety.
The only components that should be renewed are the complete clutch slave unit, the bleed valve, the seals and the complete
clutch pushrod assembly.
Undo the three screws (15) securing the clutch slave cylinder (14) to the engine and withdraw the unit from the crankcase.
Remove the dust cap (12) and the bleed valve (11) and unscrew the banjo bolt (10), taking care to recover the sealing washers (8):
the unit (14) is now disconnected from hose (6).
Push in the piston to force out all the fluid from inside the cap.
The clutch pushrod (16) can now be removed. Inspect both O-rings (17) for signs of damage or deterioration and renew them
if necessary.
Operation Section reference
Drain the clutch system D 4, Draining the clutch hydraulic circuit
14
15
15
12
6
11
8
10
14
16
17