Testers
A printer can be connected to the DDS (1) via the serial port (COM1) (G) positioned on top of the instrument (1) in
order to print test reports.
Specifications
Power supply:
- from the mains - 220 V;
- from the vehicle battery - 12 V.
Components supplied with the DDS
The DDS (1) is supplied in a DDS kit, together with:
- DDS rechargeable battery
- Battery charger
- Mains power supply
- USB memory card reader
- Power and diagnosis cable with fuse
- CD for DDS software installation - PC version
- USB cable
- Belt tension sensor
Instrument power supply
The DDS (1) can be powered as follows:
- from the mains: connect mains power supply (14) to power connector (N);
- from the vehicle: connect the suitable cables (see "
");
-
from the instrument own battery: the battery (Q) is located at the top of the instrument. Please refer to the "User's
Manual" supplied with the DDS for instructions on how to use the instrument (1) with its battery and how to charge
it.
Press button (T) to switch on the display.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_5_5_00.19.1.html (4 of 41) [10/7/2008 8:43:05 PM]