Rear wheel
Overhauling the rear wheel
Remove the rear sprocket flange from the wheel (Sect. G 8,
(10) and wheel shaft (2) inspection and for wheel rim (8) overhaul, please refer to "
Sect. G 1.
Overhauling the rear brake disc
Release and remove the six screws (12) securing the brake disc (11) to the wheel shaft (2).
Remove the rear brake disc (11).
The brake disc must be perfectly clean, with no rust, oil, grease or other dirt and no deep scoring.
For brake disc service limit, please see (Sect. C 1.1,
).
Apply threadlocker to the screws (12).
Fit the brake disc (11), tighten the screws (12) to the specified torque (Sect. C 3,
It is possible to remove the vibration dampers (9) and replace them, if necessary.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_G_4_8_00.35.1.html (3 of 5) [10/7/2008 8:43:53 PM]