Gear change control
Warning
After servicing the gear change control, check the gear change pedal position.
To adjust the gear change pedal, follow the instructions provided in Sect. D 4,
Adjusting the position of the gear
.
Refitting the gear change control
To refit, reverse the removal procedure.
Note
On refitting, always renew O-rings (
17
).
Apply threadlocker to the screw (16), the pin (1) and the screw (15) and then tighten them to the specified torque
(Sect. C 3,
).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_5_6_00.29.1.html (3 of 3) [10/7/2008 8:43:31 PM]