Throttle control
–
choke
Caution
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear
in the figures near the text.
Adjusting the throttle and choke cables
Adjusting the throttle and choke cables
, for relevant instructions.
Disassembling the throttle control
Rotate the throttle control pulley until releasing the cable nipple (D) from the pulley.
Slip off the rubber gaiter (A), slacken the lock nut and turn out the adjuster (10) until it slides off the throttle control
pulley on the throttle body.
Release and remove the screws (4) and take off the cover (13). Withdraw the cable nipple (E) from the pulley and
turn out the adjuster (8) until it slides out so as to disconnect the throttle cable from the throttle control.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_1_6_00.25.1.html (2 of 8) [10/7/2008 8:43:19 PM]