Testers
The DDS queries the control unit and the elements under analysis are displayed together with their relevant values.
Checking the charging system
Note
A table at the end of this section explains the icons used in this procedure.
You can determine the engine rpm required for generator to produce just enough current to charge battery, feed the
injection-ignition system and all electric items fitted to motorcycle. When applied to a cable, the amperemeter clamp
(18) detects the magnetic field generated by the current passing through that cable.
Remove the right-hand side body panel (Sect. E 3,
).
Switch on the DDS (1), refer to "Instrument power supply".
Connect the power and diagnosis cable (Measurement Module) (3) to measurement module connector (D) of the DDS
(1).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_D_5_5_00.19.1.html (37 of 41) [10/7/2008 8:43:05 PM]