background image

Dear Ducatista,

thank you

 for trusting us with the purchase of your new Supersport.

We recommend that you 

read the use and maintenance manual carefully

, to quickly get familiar with your

Ducati and 

make the most of all its features

. In the manual, we provide lots of useful advice and information

on your 

safety

, on how to 

take care

 of your bike and on how to maintain its value through 

correct

maintenance

 by specialist Service Centres.

You can also find this manual in 

digital format, always up-to-date, in the dedicated area of the Ducati

website

 and 

in the MyDucati App

, which can be consulted both from a PC and a phone.

 

 

In this way, you will always have the 

most up-to-date version of the manual

 available and you will also find

information and frequently asked questions

 regarding your bike and the world of Ducati.

You can send suggestions for improvement regarding the contents of this Use and maintenance manual to

the following address: [email protected]

2

Summary of Contents for MONSTER 2022

















































































































































































































































Reviews: