manualshive.com logo in svg

Ducati MONSTER 1200 s, Owner'S Manual

Share
Download
Ducati MONSTER 1200 s Owner'S Manual Download Page 298

Changing bulbs

Before replacing a burnt-out bulb, make sure that the

new one matches the voltage and wattage

specifications in paragraph "Electric System" page

326.

Important

Have the bulbs changed at a Ducati Dealer or

authorised Service Centre.

Monster 1200
Monster 1200 S (USA version only)

Undo the screw (1) and detach the lens (2) from the

turn indicator support.

The bulb has a bayonet joint: press and twist counter

clockwise to remove it. Remove the bulb, then fit the

new one by pressing and turning clockwise until it

clicks into its seat. Refit the lens by inserting the tab in

the corresponding slot in the turn indicator support.

Tighten the screw (1).

2

1

Fig. 223

297

Summary of Contents for MONSTER 1200 s


















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands