![background image](http://html1.mh-extra.com/html/ducati/diavel-2014/diavel-2014_owners-manual_2537646196.webp)
Checking coolant level and topping up, if
necessary
Check coolant level in the expansion tank on the right
side of the motorcycle. Steer completely to the left
and check that the level is between the MIN and MAX
marks on the side of the expansion reservoir. Top up if
the level is below the MIN mark. Unscrew the filler
plug (1) and add ENI Agip Permanent Spezial
antifreeze (do not dilute, use pure), until reaching the
MAX level.
Screw plug (1) into seat.
This type of mixture ensures the best operating
conditions (the coolant starts to freeze at -20 °C/-4 °F).
Cooling circuit capacity: 2.5 cu.
dm (litres) - 0.66
gallons.
Warning
Place the motorcycle upright on a flat surface
and make sure the engine is cold before proceeding.
MAX
MIN
1
Fig. 142
195
Summary of Contents for Diavel 2014
