Ducati DBC 3300M, Owner'S Manual

Page: 34 / 56

Owner’s manual
English
DBC 3300M
BRUSHCUTTER 4 IN 1
34
trimming operation. Do not operate unit
without shield.
14) CUT-OFF KNIFE Trims nylon filament to the
correct length-7’, head to end of line-when
nylon trimming head is bumped on the
ground during the operation of advancing
the line. If trimmer is operated without a
cut-off knife the line becomes too long(more
than 7’) the operating speed will slow down
the engine, this will overheat or damage the
engine.
15) NYLON CUTTER HEAD Contains replacea-
ble nylon trimming line that advances when
the trimmer head is tapped against the
ground while the head is turning at normal
operating speed.
16) THROTTLE LOCK.
17) CLUTCH COVER ASS´Y
WARNING
CAUTION
Before using the product.
Please confirm the local
laws and regulations have no
limit to this kind of product
or the product can meet the
requirements of local laws and
regulations.
5. DESCRIPTION
1) BLADE. Circular blade for grass,weed or
brush cutting applications. Harness, plastic
shield and U-Handles required for blade
operation.
2) DRIVE SHAFT ASSEMBLY. Contains a
specially designed inner flexible drive shaft.
3) THROTTLE TRIGGER. Spring loaded to
return to idle when released. When acce-
lerating, press trigger gradually for best
operating technique. Do not hold trigger
while starting.
4) IGNITION SWITCH. Move switch forward
to stop, back to start.
5) THROTTLE LOCKOUT. Before accelera-
tion, compress it please.
6) U-HANDLE this handle can be adjusted at
your convenience for comfort.
7) HARNESS ASS’Y an attachment which
hang the machine on the operator and
adjustable in length.
8) AIR CLEANER COVER Contains replacea-
ble felt element.
9) FUEL TANK LID.
10) FUEL TANK Contains fuel and fuel filter.
11) PRIMING BULB Presing the priming bulb
pumps (7 to 10 times before starting), will
remove all air and stale fuel from fuel sys-
tem and bring fresh fuel to the carburetor.
12) CHOKE the choke control is located on
the top of the filter cover. COLD STARTS
Pull lever up to close choke for cold starts.
Push lever down for RUN position.
13) DEBRIS SHIELD Mounted just above the
cutting attachment. Helps protect operator
by deflecting debris produced during the