4
ZKL 3000 RC
3. CONDITIONS & SAFETY INSTRUCTIONS
WARNING!
Please read all safety instructions carefully before using the ZKL 3000 RC, ensuring you
fully understand the system and how it works. When precautionary measures and safety
instructions are not followed properly there is a risk of electric shock, fire or even death.
a. Conditions of use
You are only allowed to install the ZKL 3000 RC if:
• you hold the ZKL 3000 RC competencies, and they are in date
• you have been assigned the appropriate user rights on MTinfo 3000
• you have been authorised to install the ZKL 3000 RC
As a
competent
user
you are responsible for:
• the RS 3000 during use (including the installation phase)
• any relevant paperwork, user names and passwords (and any authorisation codes via text
message or PIN that you have been assigned)
• managing your password and (if applicable) your PIN. You must
never
share this
information with others
b. Instructions
Other important instructions
• There are certain situations where it is not possible to switch the ZKL 3000 RC.
Please see the “Troubleshooting” section for more information should you encounter
any problems
• Never perform any repairs to a ZKL 3000 RC. Please contact Dual Inventive for maintenance
and repairs
• Override keys must only be handed out to those who hold the ZKL 3000 RC competency
• Please take good care of the ZKL 3000 RC override keys by organising proper key management
to ensure they are not lost, stolen or damaged
Instructions for first use
• Check whether the ZKL 3000 RC has the correct certification. Please consult our website
for the required certificates: www.dualinventive.eu
• Always take care of your own safety within the railway environment using the most current
applicable legislation
• Always visually inspect the ZKL 3000 RC for damage and perform a function test
DO NOT USE
any ZKL 3000 RC if any damage or defects are detected. Please apply a label,
quarantine and return to your stores to be sent to Dual Inventive
• Always use the installation procedure set out in this manual for the ZKL 3000 RC
• Always start the installation with two fully charged batteries
>
>
index
>
