Du Pont Cyrel FAST 2000TD, Operation Manual

Page: 73 / 106

Maintenance
4-15
Changing the waste roll
Follow the description below when changing a waste roll. For change of nonwoven and PET rolls please
refer to the "Changing nonwoven (NW) and PET rolls" on page 4-7.
WARNING: Refer to the "Safety precautions" on page 0-9 and the separate Safety Instruction
Manual part No 21741 .
WARNING: Wear safety protection, e.g. safety shoes, when handling the heavy rolls.
Tools required
• Translyft or other lifting device. Please see detailed description of operating the "Translyft lift table" on
page 2-17.
NOTE: The lifting device is an optional extra.
• Pair of scissors or stanley knife.
• Double-side self-adhesive heat resistant tape (e.g. Tesa 4965 (50 mm/2"), heat resistant up to 200 °C
transient/100 °C prolonged).
• Duct tape.
Procedure
1. Open the rear cover.
2. Dismount the air compression hose for the
air shaft on the right side of the roll: pull the
lock ring of the quick release coupling
upwards to release the air pressure.
Release the lock ring, then lift the entire
coupling upwards to remove.
January, 2020 Operation Manual | Cyrel FAST 2000TD