QUICK START GUIDE
CONNECTING THE UNIT
a) Connect an RF input to the “RF IN” F connector
b) Connect a BNC cable to the “ASI-OUT” connector
c) Connect the supplied power supply and plug power supply to an AC outlet
d) Tune the RF channel to be demodulated on the front panel, once the tuner lock
led lights the DVB-ASI signal will be routed to the ASI OUT connector.
COMMUNICATING WITH THE DEVICE
a) The DTV-R3000 is shipped with DHCP enabled. When the unit is first powered
up, and if a DHCP server is not found on the network, then the unit will default to
the IP address [192.168.0.1], subnet [255.255.252.0], gateway [X.X.X.X] and
DNS [X.X.X.X]
b) A static IP address can be set using a serial connection.
DTV-R3000
ATSC DEMODULATOR
