6
You can use the timer to switch the cooling ON/OFF for certain times in the day.
It is recommended that the water filter is checked and cleaned after the first week
of the season. Debris that may have built up during the off season will have been
flushed through, and these will affect the ice bank performance if not removed.
Before you get started, have a bucket of clean water on hand. This will be used to clean the
rings around the cylinder which is housed inside the water filter.
1
Unscrew the cap off the water filter and pull the cylinder with the orange rings out.
2
Unscrew the cap off the cylinder.
Be careful not to drop the rings on the floor!
3
Slide the rings off the cylinder and into the bucket of water.
4
Clean the rings in the water and put them back on the cylinder. Screw the cylinder cap
back on.
5
Put the cylinder back into the water filter and screw the cap back on.