4
Fill the ice bank with
clean, fresh water (rain water if possible)
. Do not use bore
water that is visibly discoloured or causes iron staining.
Water with high dissolved solids may alter the ice making process, reduce the ice yield and
interfere with the ice sensing circuit that controls the ice bank.
Water with extremely low dissolved solids (e.g. some reverse osmosis treated water) may also
prevent the ice bank from running as there won’t be a conductive path across the probes of the
ice bank sensor.
1
Bleed the water pump and check all valves are open (except the drain valve).
2
Before powering on the unit, check that the cooling and chilled water pump switches are in
the OFF position.