DTS DOCTUS 1, User Manual, Page: 22 / 25

User Manual
Ver. 1.02 20 di 21
DOCTUS
8.2.2 Top Hat Installation
•
Make sure the top hat is the right one for the fixture on
which you want to mount it on.
•
Remove the top hat and the two fixing screws from their
package.
•
Correctly position the top hat. Its mounting brackets have to
be on top of the fixture’s rotation socket and the screw “ B ”
must come out from the top hat’s bracket through-hole.
• Insert the two screws “ A ” in the designated hole on the
rotation pivot.
•
Adequately fasten the two screws “ A ” by using the proper
hex key.
•
A medium resistant threadlocker (on screws “ A ”) is
recommended in case of permanent installation.
9 Warranty
D.T.S. Illuminazione Srl’s products are guaranteed against any material or operational defect starting from the
purchasing date, given that the acquired products have been used as indicated on this User Manual.
Please refer to www.dts-lighting.it for the complete warranty terms and conditions.
10 Product Disposal
DOCTUS are electrical devices and therefore, at the end of their lifetime, must be disposed according to local
regulations and for no reason can they be dispersed in the environment.