DTS Alchemy 7, Manual, Page: 9 / 51

RDM – DMX – Manual
Ver. 1.01 7 di 47
ALCHEMY 7
3 RDM Functions
By using a RDM controller, it is possible to read/set DMX addresses, DMX modes and other parameters.
ALCHEMY 7 accepts the following RDM commands:
RDM Device Model ID: - ALCHEMY 7: 0x001B
- ALCHEMY 7F: 0x001A
RDM PID DESCRIPTION RDM PID VALUE GET SET
Category – Network Management
DISC_UNIQUE_BRANCH 0x0001
DISC_MUTE 0x0002
DISC_UN_MUTE 0x0003
Category – Status Collection
STATUS_MESSAGES 0x0030 X
STATUS_ID_DESCRIPTION 0x0031 X
Category - RDM Information
SUPPORTED_PARAMETERS 0x0050 X
PARAMETERS_DESCRIPTION 0x0051 X
Category – Product Information
DEVICE_INFO 0x0060 X
DEVICE_MODEL_DESCRIPTION 0x0080 X
MANUFACTURER_LABEL 0x0081 X
DEVICE_LABEL 0x0082 X X
SOFTWARE_VERSION_LABEL 0x00C0 X
Category - DMX512 Setup
DMX_PERSONALITY 0x00E0 X X
DMX_PERSONALITY_DESCRIPTION 0x00E1 X
DMX_START_ADDRESS 0x00F0 X X
Category – Sensors
SENSOR_DEFINITION 0x0200 X
SENSOR_VALUE 0x0201 X X
Category – Power/Lamp Settings
DEVICE_HOURS 0x0400 X
LAMP_HOURS 0x0401 X
Category – Display Settings
DISPLAY_INVERT 0x0500 X X
Category – Configuration
PAN_INVERT 0x0600 X X
TILT_INVERT 0x0601 X X
Category – Control
IDENTIFY_DEVICE 0x1000 X X
Category – Dimmer Settings
CURVE 0x0343 X X
CURVE_DESCRIPTION 0x0344 X
OUTPUT_RESPONSE_TIME 0x0345 X X