DTS Alchemy 7, Manual, Page: 8 / 51

RDM – DMX – Manual
Ver. 1.01 6 di 47
ALCHEMY 7
DMX address: 1 DMX address: 45 DMX address: 89
IP address: 002.214.192.007 IP address: 002.214.192.008 IP address: 002.214.192.009
Universe: 1 Universe: 1 Universe: 1
2.2 Ethernet to RDM/DMX Operation
For Ethernet to RDM/DMX operation, connect the light controller’s Art-Net / s-ACN output signal via Ethernet
switch to the etherCON RJ45 input connector of the first unit only.
In this configuration, the first unit works as an Ethernet-to-DMX converter and sends RDM/DMX signal to its
DMX output connector. All the other units must be connected as a DMX chain with standard DMX settings.
Only for the first unit , scroll until reaching “NETWORK” menu (refer to DISPLAY FUNCTIONS for details):
• Inside the “INPUT” menu, select “Art-Net” or “sACN” as input control signal.
•
Inside the “IP ADDRESS MODE” menu, select “Default” or “Static” mode.
• Inside the “ETH TO DMX” menu, select ON.
•
Set the IP address and Net Mask. IP address must be different for each unit on a network.
• Set the Art-Net or sACN Universe.
DMX address: 1 DMX address: 45 DMX address: 89
IP address: 002.214.192.007
Universe: 1
DMX address: 1 DMX address: 45 DMX address: 89
IP address: 002.214.192.008
Universe: 2
For installations where long-distance DMX cable connections are needed, the use of a DMX terminator is
recommended.
Please refer to page 4 for further information DMX terminators.