DTM Print LX 3000e, User Manual

Page: 31 / 65

27
3A: Monitoring Ink Levels
Ink levels can be monitored at any time by using the PrintHub. Immediately after
printing starts, PrintHub will display the ink levels in the upper right corner of the
application. Ink is displayed in 5% increments.
3B. Using the Cost Estimator
The cost estimator is found under the queue section on the first tab of the PrintHub.
The last five job costs are stored in the list. Each job will show the cost per label based
on the cost per cartridge entered below the list. Enter the actual cost of the cartridge
you paid. Prints remaining on the currently installed cartridge and total prints on the
new cartridge are both displayed.
To see a printable/savable report click on the document icon next to the job you want
to see. A report will display the information. You can print or save the report from this
screen. You can also change the currency using the drop down, change the job name or
adjust the cost from this screen.