DTK PRM-13i, User Manual

Page: 23 / 34

17
CHAPTER 4 AWARD BIOS
If the first time installation of this system board, please press the “DEL” key to get into the
BIOS Setup while Power-on memory testing, and select “Load Optimized Defaults”, and then
select the Frequency/Voltage Control to choose the proper “CPU Clock Ratio” for the CPU
installed. For example, X6 should be selected for Celeron 400MHz CPU, and the default
“CPU Host/PCI Clock” is 66/33MHz, don’t over specification selected. Actually, the
currently Celeron 66MHz based CPU, always locked the CPU Clock Ratio inside. So the
Ratio selected is not take in effect, the Optimized defaults loaded is enough for this
jumperless mainboard. Don’t change any setting in the “Advance Chipset Features” which
are important factors for the stability of this system. If an incorrect setting caused the system
can not boot, just turn off the power, and then press “ESC” key until the power turned on
again and the BIOS Title displayed. It’s a safe mode to recover the system.
The detail BIOS description for this I810 system, Please reference to the
\awardbios\i810bios.rtf on Mainboard User’s Guide & Software CD-ROM.