Chapter 4
30
Reload Global Timer Event: When Enabled, an event occurring on each device listed below
restarts the global time for Standby Mode.
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
4.6
PCI CONFIGURATION
The PCI Configuration Setup option is used to configure the PCI add-on Cards on PCI
Slots. Without proper setup the PCI Add-on Cards might not function properly.
ROM PCI/ISA BIOS (2A69JD1C)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
: No
: Manual
: Disabled
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
PCI IDE IRQ Map To
Primary IDE INT#
Secondary IDE INT#
Used MEM base addr
Used MEM Length
Assign IRQ for USB
: PCI-AUTO
: A
: A
: C800
: 8K
: Enabled
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
ESC: Quit
↑ ↓ →
←
: Select Item
F1: Help
PU/PD/+/-: Modify
F5: Old Values
(Shift)F2: Color
F6: Load BIOS Defaults
F7: Load Setup Defaults
Fig. 25
Note: Change these Settings only if user is familiar with the Chipset and all the PCI Add-on
Cards functions.
