SOL8SDR Hardware Guide
Commercial in Confidence
Revision 8.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2016 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 3-23
3.2
SOL8SDI Option as a Video Source
Composite
or
HDMI
video signals can also be used as a source for
SOL8SDR
by using a
SOL8SDI
option to
convert the signal source to SDI.
Note
: SOL8SDI receives 5VDC power from the SOL8SDR. This is configurable from Domo Device Controller
Video Source
selection.
No
Item
Function
1
SOL8DI
Primary unit.
2
DIN1.0/2.3 2-way jack (socket)
PAL or NTSC composite video input connects here.
3
Micro HDMI type-D socket
HDMI video input connects here.
4
HD-BNC 75R jack (socket)
SD-SDI or HD-SDI video output here.
5
CA2847 HD-BNC plug (pin)
Connect this to SOL8SDI SDI OUT connector.
6
CA2847 DIN 1.0/2.3 2-way plug (pin)
Connect this to SOL8SDR-R SDI input.
7
CA3044 HD-BNC plug (pin)
Connect this to SOL8SDI SDI OUT connector
8
CA3044 MCX 75R plug (pin)
Connect this to SOL8SDR-C SDI input.
